Roof rack NAVIS Mitsubishi L200 flat aluminum black by Horntools

825.00

Roof rack modular system NAVIS
(From year of construction 2016+)

The NAVIS roof rack was developed as a modular system. The roof rack made of high quality aluminum
is not only very light, but also extremely stiff. The high load capacity of 300 kg is unique in this segment.
We decided on airline brackets so that you can continue to use your fittings with our system.

The NAVIS is built so low that the overall height of the vehicle compared to the original railing does not change.
We test every system on the vehicle until we are satisfied with the result and we achieve our horntools quality.

Attention:
The roof rack system is only suitable for double cabins with original mounting options on the roof.


Properties:
  • Load capacity 300 kg static 100 kg dynamic *
  • Fuel consumption & wind noise Optimized by pipe technology
  • Extremely low structure. Overall vehicle height does not change compared to the original railing **
  • Lighting fixtures in the front panel for all common LED bars
  • 36 integrated airline breakpoints
  • 6 attachment points of the carrier mount to distribute the weight evenly on the roof.
  • Use of original mounting points (no drilling or flexing) – the carrier can be dismantled without any problems
  • Modular structure – when changing vehicles, you can take your NAVIS roof rack with you.
  • High quality powder-coated aluminum 5052
  • 5 year guarantee
  • TÜV & vehicle manufacturer tested quality
  • Roof rack only 12.5 kg
  • Lashing points in the roof rack base
  • CAR SWAP – when changing vehicles you only need a new roof rack base.
  • Designed for roof tents & awnings
* The dynamic load capacity is not the manufacturer’s approval for the roof load.
The manufacturer’s roof load must not be exceeded. The static load indicates the charging capacity at a standstill.
** For the roof rack without railing and cargo. Slight deviations are possible depending on the vehicle type.
Exams and Certificates:
The roof racks were tested by Mercedes-Benz for the X-Class and a manufacturer approval was given.
In addition, the NAVIS has a TÜV test. Each individual roof rack is
tested before powder coating and measured using a special gauge. Then it is assembled for a trial. This
ensures that every carrier fits. We drive countless kilometers – on & off-road, with & without load – to
offer you a perfectly coordinated roof rack for your vehicle. We do not build a uniform mix,
but test every cultivation system until it is perfectly adapted to your vehicle and works well.

TEC-TALK:The roof rack was
tested for noise and strength while driving on various vehicles for approx. 1500 km . The conclusion is that the additional wind noise is
minimal due to the round tube and does not bother us. From 120-140 km / h the wind noise becomes noticeably stronger with roof racks.
In exceptional cases, a louder wind noise or a roar can occur, often the reason is
a tension in the carrier, since the vehicle and the carrier have tolerances in production.
In these cases, it usually helps to loosen the carrier again and build it up without tension.
If there are still annoying wind noise, the installation of a spoiler or additional LED lamps will help.


Scope of delivery:
  • Navis base carrier
  • Roof rack foot
  • Mounting material and installation instructions
  • spoiler

Características